Samson Type 5824, Монтаж и эксплуатация

Страница: 5 / 64

EB 5824-1 EN 1-1
Safety instructions and measures
1 Safety instructions and measures
Intended use
The Type 5824 and Type 5825 Electric Actuators are designed to operate a mounted globe
valve used in heating, ventilation and air-conditioning systems as well as in process
engineering and industrial energy transfer systems. The actuators are designed to operate
under exactly defined conditions (e.g. thrust, travel). Therefore, operators must ensure that an
actuator is only used in operating conditions that meet the specifications used for sizing the
actuator at the ordering stage. In case operators intend to use an actuator in applications or
conditions other than those specified, contact SAMSON.
SAMSON does not assume any liability for damage resulting from the failure to use the de-
vice for its intended purpose or for damage caused by external forces or any other external
factors.
Î
Refer to the technical data for limits and fields of application as well as possible uses. See
the 'Design and principle of operation' section.
Reasonably foreseeable misuse
The actuators are not suitable for the following applications:
− Use outside the limits defined during sizing and by the technical data
− Outdoor use
Furthermore, the following activities do not comply with the intended use:
− Use of non-original spare parts
− Performing service and repair work not described
Qualifications of operating personnel
The actuators must be mounted, started up, serviced and repaired by fully trained and quali-
fied personnel only; the accepted industry codes and practices are to be observed. Accord -
ing to these mounting and operating instructions, trained personnel refers to individuals who
are able to judge the work they are assigned to and recognize possible hazards due to their
specialized training, their knowledge and experience as well as their knowledge of the appli
-
cable standards.