Samson TROVIS 6495-2, Монтаж и эксплуатация

Страница: 57 / 186

EB 6495-2 EN 7-11
Start-up and configuration
7.1.3.2 Setting up additional
display
If rows 1 to 5 in the display are all assigned
and further variables are to be displayed, an
additional display can be added. The addi -
tional display is activated in the A.2 Oper-
ation display submenu. Five additional
rows are available. The additional display is
set in the C.6 Additional display sub-
menu of the corresponding Controller [1] or
[2] (
1C.6 or 2C.6 ).
For control modes with two controllers ( M.1-
3/-4/-5/-6 ) either one controller with addi-
tional display or both controllers without ad -
ditional display can be configured. If the ad -
ditional display of Controller [1] , for exam -
ple, covers the display of Controller [2], the
display of Controller [2] can be briefly
viewed by pressing one of the cursor keys (
or ) the manual/automatic key ( ) in
the operating level.
It is also possible to display the additional
displays of both controllers.
The following table shows the settings neces-
sary to set up the additional display (see An-
nex A for details).
Select
variable
Select type of
representation Hide row
Row 1 C.6.1-1…41 C.6.2-1…6 C.6.1-0
Row 2 C.6.3-1…41 C.6.4.1…6 C.6.3-0
Row 3 C.6.5-1…41 C.6.6.1…6 C.6.5-0
Row 4 C.6.7-1…41 C.6.8-1…6 C.6.7-0
Row 5 C.6.9-1…41 C.6.10-1…6 C.6.9-0
Example: Based on the example in sec -
tion 7.1.3.1, an additional display is to be
set up
for Controller [1] in the right display section.
Its fourth row is to display the output AO2
numerically inverted..
According to the table above, the setting is
made in the
1C Controller [1] menu in
the 1C.6.7 Row 4 and 1C.6.8 Row 4
representation configuration items. To ac -
tivate the additional display, the A.2 Oper-
ation display configuration item must be
configured.
The output Y of the controller is to be as-
signed to the Output AO2 as a source.
The controller is currently in the operating
level:
Î
Enter the configuration menu (see sec -
tion 7.1.1).
Assign source for Output AO2
3x Select O Output menu.
1x Enter O Output menu.
Note