Samson Trovis 6493, Монтаж и эксплуатация

Страница: 7 / 128

EB 6493 EN 1-1
Safety instructions and measures
1 Safety instructions and measures
Intended use
The TROVIS 6493 Compact Controller is a digital controller to automate the industrial and
process plants. The controller is suitable for controlling continuous, on/off or pulsing final
control elements.
The controller is designed to operate under exactly defined conditions. Therefore, operators
must ensure that the controller is only used in operating conditions that meet the specifica
-
tions used for sizing the controller at the ordering stage. In case operators intend to use the
controller in other applications or conditions than specified, contact SAMSON.
SAMSON does not assume any liability for damage resulting from the failure to use the de
-
vice for its intended purpose or for damage caused by external forces or any other external
factors.
Î
Refer to the technical data for limits and fields of application as well as possible uses. See
the 'Design and principle of operation' section.
Reasonably foreseeable misuse
The controller is not suitable for the following applications:
− Use outside the limits defined during sizing and by the technical data
Furthermore, the following activities do not comply with the intended use:
− Use of non-original spare parts
− Performing service and repair work not described
Qualifications of operating personnel
The controller must be mounted, started up, serviced and repaired by fully trained and quali -
fied personnel only; the accepted industry codes and practices must be observed. According
to these mounting and operating instructions, trained personnel refers to individuals who are
able to judge the work they are assigned to and recognize possible hazards due to their spe
-
cialized training, their knowledge and experience as well as their knowledge of the applica -
ble standards.