Samson TROVIS 5757-3, Руководство по настройке

Страница: 4 / 24

4 KH 5757 EN
General
1 General
The functions and parameters are changed in the TROVIS-VIEW software. To transfer settings
from the software to the electric actuator or vice versa, they must be connected. See
u
EB 6661.
The software in online mode has a direct influence on the connected device, and, as a result,
on the valve. To avoid personal injury or property damage, plant operators and operating
personnel must prevent hazards that could be caused in the control valve by the process me
-
dium, the operating pressure, the signal pressure or by moving parts by taking appropriate
precautions. They must observe all hazard statements, warning and caution notes in the ref
-
erenced documents.
Accessories for communication:
The TROVIS-VIEW software for revision 2 of the TROVIS 5757-3 Electric Actuator with Pro-
cess Controller is required. The TROVIS-VIEW software can be downloaded free of charge
from our website (
u
www.samson.de at Services > Software > TROVIS-VIEW). The software
can also be supplied on a CD-ROM. Further details can be found in Data Sheet
u
T 6661.
WARNING !