Samson TROVIS 5571, Монтаж и эксплуатация

Страница: 4 / 44

1 Operation
The programmable logic controller (PLC) is freely programmable. The controller is delivered
without an executable application in the memory. The application must be developed sepa-
rately for the desired purpose on a personal computer using ISaGRAF ® (programming as in
IEC 61131-1) and then transferred to the controller.
On start-up, after transferring the generated application, the current time and date must be set
in the controller (–> section 1.4).
1.1 Operating elements
1.1.1 Operating keys
The keys are located in the front panel of the PLC and protected by a Plexiglas door.
Changeover key
(press with pen or other pointed item )
Switch between levels (after entering the key code)
Reset key
(press with pen or other pointed item)
Reset freely accessible parameters and function blocks to their default values
(factory settings)
Cursor key(s)
Pressing both keys together:
– Switch to information level
Pressing one of the keys separately:
– Navigate in levels (also in the application developed with ISaGRAF
®
)
– Set data points
Enter key
– Open levels (also in the application developed with ISaGRAF
®
)
– Activate editing mode for parameters and function blocks
– Confirm entered settings
4
EB 5571 EN
Operation