Set point correction switch
Changes remain effective until the switch position is changed again
–:
Set point reduction in 1 °C increments per notch
0:
No change in set point
+:
Set point increase in 1 °C increments per notch
1.2
Operating modes
Day mode (rated operation) (
)
The set points set for rated operation are constantly used by the controller irrelevant of the
programmed time-of-use or summer mode.
Stand-by operation (
)
The ventilation is deactivated. The frost protection is active.
Manual operation (
)
Manual operation of valves and pumps.
8
EB 5477 EN
Operation