1.4
Data retrieval
You can view information in the operating level concerning various temperatures, control
signals, times-of-use, public holidays, states of the binary inputs as well as the baud rate
(–> Fig. 30). Which temperatures are shown depends on the system code number and the
configuration.
You will find a list of the various displays in section .
How to proceed:
The controller shows the time.
Press the arrow key.
Every time you press the key, another dat point appears on the display.
If required, you can view other information concerning a data point.
1.5
Setting the time and date
Set the current date and time directly after start-up and after a power failure, if necessary.
You must set the time and date in the parameter level.
How to proceed:
Switch to the configuration and parameter level.
PA
appears on the display.
Press the enter key.
The time appears on the display.
The
symbol starts to blink slowly.
10
EB 5477 EN
Operation
24
Y1 Y2 Y3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
2
1
0
3
CO
M
Y1
M
M
Y3
24
Y1 Y2 Y3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
2
1
0
3
PA
M
Y1
M
M
Y3