Samson series 43, Перевод оригинальной инструкции

Страница: 20 / 56

4-2 EB 2430 EN
Shipment and on-site transport
4.4 Storing the control thermo-
stat
Risk of damage to the control thermostat
due to improper storage.
Î
Observe the storage instructions.
Î
Avoid long storage times.
Î
Contact SAMSON in case of different
storage conditions or longer storage
times.
Storage instructions
Î
Protect the control thermostat against ex-
ternal influences (e.g. impact).
Î
Secure the control thermostat in the
stored position against slipping or tip-
ping over.
Î
Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
Î
Protect the control thermostat against
moisture and dirt. Store it at a relative
humidity of less than 75 %. In damp
spaces, prevent condensation. If neces-
sary, use a drying agent or heating.
Î
Make sure that the ambient air is free of
acids or other corrosive media.
Î
The permissible storage temperature of
the control thermostat is between –20
and +65 °C/–4 to +150 °F.
Î
Do not place any objects on the control
thermostat.
NOTICE
!
We recommend regularly checking the con-
trol thermostat and the prevailing storage
conditions during long storage periods.
SAMSON's After-sales Service can provide
more detailed storage instructions on re-
quest.
Note
Tip