Samson Media 7, Монтаж и эксплуатация

Страница: 24 / 96

24 EB 9510 EN
Design and principle of operation
3.6 Technical data
Table 1: General technical data
Media 7 Differential Pressure Meter
(All pressure in bar (gauge); all errors and deviations are specified in % of the adjusted measuring span)
Mounting position Upright with display facing sideways
Principle of operation The differential pressure at the diaphragm is converted into an electric signal by
the AMR system.
Pressure rating PN 60, overloadable on one side up to 60 bar
Oxygen: PN 50, overloadable on one side within the adjusted system pressure
Characteristic Differential pressure proportional to the tank geometry
Deviation from terminal-based
linearity
<±1.6 % (including hysteresis)
Sensitivity ≤0.25 % or <±0.5 % depending on measuring span selected
Effect of static pressure <0.03 %/1 bar
Display
Display LCD 128 x 64 (90 x 40 mm)
Storage temperature –40 to approx. +80 °C
Operating temperature Two-wire version: –20 to approx. +70 °C
24 V version: –40 to +70 °C
Measuring range in mbar 0 to 160 0 to 600 0 to 1600 1) 0 to 3600 1)
Adjustable measuring span in mbar
Class ±1 % – ≤630 to ≥150 ≤1700
1)
to ≥320 ≤3800
1)
to ≥720
Class ±1.6 % ≤170 to ≥60 ≤150 to ≥120 – –
Effect of ambient temperature in the range from –20 to +70 °C
On zero in %/10 K <±0.4 <±0.1 <±0.1 <±0.1
On span in %/10 K <±0.4 <±0.1 <±0.1 <±0.1
Internal absolute pressure sensor
Measuring range 0 to 60 bar
Deviation from terminal-based
linearity
<±1.6 %
Effect of ambient temperature ≤0.018 % (within the range from –20 to +70 °C)
1) A class accuracy of 0.6 % can be expected in these measuring ranges with measuring spans ≤100 % to ≥75 % of
the nominal range.