Samson 5007-2 Series, Монтаж и эксплуатация

Страница: 47 / 72

EB 9511 EN 10-1
Servicing
10 Servicing
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
Risk of fatal injury due to electric shock
(230 V version).
Î
Before connecting wiring, performing
any work on the device or opening the
device, disconnect the voltage supply
and protect it against unintentional re
-
connection.
Î
Only use power interruption devices that
are protected against unintentional re
-
connection of the power supply.
The gateway was checked by SAMSON
before it left the factory.
Î
The product warranty becomes void if
service or repair work not described in
these instructions is performed without
prior agreement by SAMSON's After-
sales Service.
Î
Only use original spare parts by
SAMSON, which comply with the origi
-
nal specifications.
10.1 Firmware updates
Contact your local SAMSON engineering
and sales office or subsidiary to request a
firmware update. SAMSON subsidiaries are
listed on our website at
u
www.samsongroup.com ( About SAMSON
> Sales offices ).
Required specifications
Please submit the following details on re-
questing a firmware update:
− Type
− Serial number
− Configuration ID
− Current firmware version
− Required firmware version
10.2 Periodic inspection and
testing of the gateway
We recommend inspection and testing ac -
cording to Table 10-1 at the minimum.
DANGER !
Note