manualshive.com logo in svg

Samson 3286, Монтаж и эксплуатация

Поделиться
Скачать
Samson 3286 Скачать руководство пользователя страница 31

EB 8257 EN 

 31 

Mounting and start-up

Fail-safe position

 

Î

Shut off the signal pressure line.

 

Î

Check whether the valve moves to the 

fail-safe position.

Adjustable packing

A label on the yoke (3) indicates whether an 
adjustable packing is installed.

1. 

Tighten the threaded bushing gradually 
(by turning it clockwise) until the packing 
seals the valve.

Risk of valve damage due to the threaded 
bushing tightened too far.
Make sure that the plug stem can still move 
smoothly after the threaded bushing has 
been tightened.

2. 

Open and close the valve several times.

3.  Check the valve for leakage (visual in

-

spection).

4.  Repeat steps 1 and 2 until the packing 

completely seals the valve.

If the adjustable packing does not seal prop

-

erly, contact SAMSON's After‑sales Service 
department.

Pressure test

During the pressure test, make sure the fol-
lowing conditions are met:

 

−

Retract the plug stem to open the valve.

 

−

Observe the maximum permissible pres-
sure for valve and plant.

The plant operator is responsible for 
performing the pressure test.

 

SAMSON's 

After‑sales Service department can support 
you to plan and perform a pressure test for 
your plant.

Tip

NOTICE

!

Note

Note

Содержание 3286

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды