EB 3135-1 EN
7
Safety instructions and measures
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the referenced documents and observe the specified hazard statements, warnings
and caution notes. Furthermore, the operating personnel must be familiar with the applicable
health, safety and accident prevention regulations and comply with them.
Referenced standards and regulations
The regulators comply with the requirements of the European Pressure Equipment Directive
2014/68/EU. Devices with a CE marking have an EU declaration of conformity, which in
-
cludes information about the applied conformity assessment procedure. This EU declaration
of conformity is included in the Annex of these instructions (see section 10.2).
Non-electric valve versions whose bodies are not lined with an insulating material coating do
not have their own potential ignition source according to the risk assessment stipulated in
EN 13463-1: 2009, section 5.2, even in the rare incident of an operating fault. Therefore,
such valve versions do not fall within the scope of Directive 2014/34/EU.
Î
For connection to the equipotential bonding system, observe the requirements specified in
section 6.4 of EN 60079-14 (VDE 0165 Part 1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
−
Mounting and operating instructions for
e.g.
Type 1 NI Strainer
u
e.g.
TROVIS 5724-3 and TROVIS 5725-3 Actuators
u
e.g.
TROVIS 5724-8 and TROVIS 5725-8 Actuators
u
e.g.
TROVIS 5725-7 Actuator
u
e.g.
TROVIS 5757-3 Actuator
u
e.g.
TROVIS 5757-7 Actuator
u
e.g.
Type 5824 and Type 5825 Actuators (three-step versions)
u
e.g.
Type 5824 and Type 5825 Actuators (versions with positioner)
u
e.g.
Type 5857 Actuator
u
−
Mounting and operating instructions as well as data sheets for additional components
(e.g. shut-off valves, pressure gauges etc.).
