Samon SU15AO3B, Руководство пользователя

Страница: 11 / 23

H10
www.samon.nl - info@samon.nl V1-2023-EN
5.4 Aligning wheels with automatic depth control
If the wheel sets are not aligned at the same height, they can be adjusted as follows.
NOTE!!!
Adjust the left and right side separately.
•
Connect the two supplied connection hoses to the colour-coded connections.
•
Lift the machine until the wheels clear the ground.
•
Turn on the automatic depth control.
•
Move the probe up and down and make sure that the wheels turn a full revolution.
•
Repeat this several times.
•
Turn the wheel sets in the maximum extended position and remove the connection hoses.
•
Screw the protective caps of the connecting nipples back on.
•
Check the alignment again.
•
Red connection: Long hose
•
Green connection: Short hose