Sames Inocart VT, Инструкция по эксплуатации

Страница: 17 / 67

17 Member of Exel group
DRT7159
B - 2023/03
4. Operation
4.1. With vibrating table
The powder paint is contained in its original box of up to 20kg. It is placed on the vibrating table.
The vibration of the table is obtained thanks to the vibrator and allows the fluidizing head to penetrate the powder.
The operation of the vibrator is triggered by an action on the gun trigger.
The fluidizing rod, supplied with compressed air, "fluidizes" the powder paint.
The powder paint thus fluidized is then suctioned and then delivered by the powder pump to the powder projector,
to which it is connected via a powder transport hose.
4.2. With fluidized tank
The powder contained in the tank, with a maximum capacity of 50 l of powder, is fluidized by means of an ascending
air current, evenly distributed through a porous plate located at the base of the tank.
The fluidized powder paint is then extracted and discharged by the powder pump to the powder projector. The
fumes are extracted by means of a 40 mm section hose which must be connected to the booth side.
5. Specific tool
Other necessary tools and accessories:
The tools listed below are recommended for product maintenance.
• Torx screwdriver
• Flat wrench 10 mm
• Socket wrench 10 mm
• Torque wrench
• Blue tthreadlocker (normal) P/N: H2CPAL046.