Use of the product
32
9.2
Safety in production
Guards (motor cover, coupling guard, housings, ...) are
set up for safe use of the equipment.
The manufacturer can not be held responsible in case of
bodily injury as well as breakdowns and / or damage of
the material resulting from the destruction, the
occultation or the total or partial removal of the
protectors.
9.3
Start up
Pumps are tested for operation at the factory using a light weight oil
lubricant.
Before commissioning, this lubricant must be removed by flushing with
a suitable solvent.
At the end of the day, flush with a suitable solvent.
It is advisable to stop the fluid section in the "low" position in order to
prevent the product from taking hold of the piston rod.
