Maintenance
06/11/2020
582127110-2B1000-indD-EN.docx
34
10
Maintenance
Attention
Before any pump maintenance or service work
performed can be imperative to follow the
depressurization procedure and the safety instructions.
Only qualified personnel should be allowed to carry out
the following interventions. Observe the safety
instructions given in this and all other documentation.
These procedures cover only the most common
problems. If the information given here does not solve
the problem you are experiencing, please contact your
local SAMES KREMLIN representative for assistance.
During prolonged shutdown, stop the pump when the
piston is in the low position.
Guards (motor cover, coupling guard, housings, ...) are
set up for safe use of the equipment.
The manufacturer can not be held responsible in case of
bodily injury as well as breakdowns and / or damage of
the material resulting from the destruction, the
occultation or the total or partial removal of the
protectors.
