Index revision : A
20
7140
Wiring configuration between the Inomotion and two Inorecip V.
4.2.4.
Grounding connection
WARNING : it is imperative to connect the Inorecip V to the ground of the control unit or to a
good quality ground.
From the control unit or a good quality ground,
connect a green/yellow protective grounding
cable to the brass screw (
A
) located on the base
of the
Inorecip V
.
Connect a green/yellow protective grounding
cable to a bar or nut of the powder projectors by
means of a screw (
B
) for example.
Inorecip V - 2
Inorecip V - 1
Inomotion
(
A
)
(
B
)
