Environment
13
2
Environment
The equipment is installed on a horizontal, stable and flat ground (eg
concrete slab).
Non-moving equipment must be fixed to the ground by suitable
fasteners (spit, screws, bolts, ...) to ensure their stability during use.
To avoid risks due to static electricity, the equipment and its
components must be grounded.
For dosing equipment
(pumps, elevators, chassis, etc.), a
ground connector is available. Use this connector to
connect the equipment to the general "earth".
Have the earth continuity checked by a qualified
electrician. If earth continuity is not assured, check terminal,
wire and grounding point. Never operate the equipment
without solving this problem.
Do not store
more flammable products than necessary
inside the work area.
These products must be stored in
approved containers and
grounded
.
Use only grounded
metal buckets
for the use of rinse
solvents.
Cartons and papers
are to be banned. They are very bad
conductors, even insulators.
