SAMES KREMLIN
- 1 -
N° : 578.210.110-UK-1907
The pump is manufactured under the ATEX agreement and can not be modified.
SAMES KREMLIN will not be held responsible for any failure to comply with that
instruction.
Guards (air motor cover, coupling shields, housings …) have been designed for
safe use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
damage to property due to removal or partial removal of the guards
CAUTION :
Before any intervention on the equipment, shut off the air supply and follow the
general safety instructions. Open the drain or the gun to depressurize the gun.
The ram must be in the low position.
TROUBLE
CAUSE
SOLUTION
Pump does not start or stops
The fluid is polymerized,
hardened, dried in the pump.
Clean the pump; change parts if
necessary.
Broken part(s) in the pump
Remove, check and replace.
Incorrect air supply
Check air pressure.
Packings of fluid section are
stuck
Clean or replace the packings.
Frosting (motor)
Defrost and lubricate using oil.
Outlet fluid hose is blocked
Change hose.
Gun nozzle is clogged
Clean it.
The pump cycles continuously
(drain valve closed)
No starting up
Check feeding pressure.
Lack of material
Add material.
Valves are blocked
Clean or replace.
The pump at stop, the piston
carries on going down
Suction valve worn or incorrectly
mounted
Check and replace parts.
Plug or drain valve not tightened
The pump at stop, the piston
carries on going up
Head piston seals or upper valve
worn or incorrectly mounted
Check and replace parts.
Plug or drain valve not tightened
