Doc.-ID: 220815-PT10BA-ES-RoughCam IPM2036_en_rev.00.docx, Page 6 of 28
2.2
Electrical parameters of the camera
Power supply of the camera via Ethernet (PoE):
Voltage supply:
PoE, IEEE 802.3af/802.3at type 1 class 3
Reference voltage:
+48 V DC (44...54 V DC)
Maximum power consumption:
12.95 W
Typical power consumption:
5.0 W
Supply of the camera with heating (PoE+):
Voltage supply:
PoE, IEE 802.3at type 2 class 4
Reference voltage:
+48 V DC (44...54 V DC)
Max. power consumption:
25.5 W (30 W from the PSD)
Typical power consumption:
12.95 W
2.3
Connection cable
Description:
Data transfer and power supply of the camera
module (compliant with DIN EN 60079-14)
Jacket colour:
Green (GN), similar to RAL3001
2.3.1
Connection cable for models without cooling (SKD01-T/ASKD02-T)
Systemcable SKD01-T:
Outside diameter:
9.1 ± 0.2 mm
Bending radius:
10 x D
a
when installed, 5 x D
a
after relocation
Data line:
4 x 2 x AWG22/1 CAT.6
Properties:
PUR halogen-free, flame-retardant, UV-
resistant, chemical resistance, shielded
Figure 2-1 Sectional view of SKD01-T
