Doc.-ID: 200917-PT08BA-ES-ExCam IPP1275_en_rev.00.docx, Page 6 of 28
2.3
Electrical parameters of the camera
Power supply of the camera via Ethernet (PoE):
Voltage supply:
PoE, IEEE 802.3af/802.3at type 1 class 2
Reference voltage:
+4 V DC
Maximum power consumption:
4.0 W
Typical power consumption:
2.5 W
2.4
System cable SKD04-T.flex
Description:
Data transfer and power supply of the camera
module
Jacket colour:
Green (GN), similar to RAL 6018
Outside diameter:
8.7 ± 0.3 mm
Bending radius:
8 x D
a
when installed and 4 x D
a
after installation
Temperature:
-
25°C … +80°C during installation
-
60°C … +80°C fixed installed
Data line:
4 x 2 x AWG24/7 blank, CAT.6
Shielding:
Copper, tinned wire 0.10, optical cov. app. 80%
Outer jacket/ Properties:
PUR FHF, halogen-free, flame-retardant (EN
60332-1-2), EMV shielded, suitable for drag
chains,
(see
Quicklink:
https://www.samcon.eu/fileadmin/documents/en/60-Assembling%26mounting/SKD04-T.flex_Datasheett.pdf
Figure 2-1 Sectional view of SKD04-T.flex
Attention!
For wiring and connection of the camera, DIN/EN/IEC 60079-14 has to
be observed. Especially for cross zone installation, measures against
zone entrainment have to be taken.