Pike Perfect
Congratulations for choosing the right model! Your new Pike Perfect.
The model is a handmade product, carefully packed for your convenience.
Please check that all items ordered are included and not damaged during transportation.
A basic model includes:
•
2 tips
•
1 midsection
•
1 fuse with canopy
•
2 elevators with carbon joiner
•
2 pcs carbon joiners
•
Aileron and flaps brass horns
•
2 pcs Rudder and elevator clevises
•
2 pcs clevis couplers 2mm
•
Wing screws
Additional you can order:
•
Ballast set
•
Wiring harness
•
Wing bags
To complete a model you will need:
•
4 pcs metal geared servos for the wings. Min. 25Ncm/35oz.in
•
1 pcs 15mm servo for elevator. Min. 30Ncm/42oz.in
•
1 pcs 13mm servo for rudder. Min. 20Ncm/30oz.in
•
8 clevises and 2mm threaded rods for the wings (or better 2,5mm)
•
4xAA Rx battery and a good switch
•
A good receiver and some extra antenna wire outside the fuse
•
Epoxy to glue in the servos and thin Cyano (CA) to secure clevises
•
Good clear tape (12mm wide) to join the tips to the midsection
•
75w soldering iron, soldering paste and soldering tin
