32
UNO
ROTARY RAKE
OPERATOR’S MANUAL
Prior to any repair or service works the machine should be cleaned thoroughly and any grass,
dirt or mud removed.
Upon inspecting any bolt connections and pins for clearance, assess whether the machine is in
proper operating condition. Replace any worn or damaged bolts, pegs, pins and other parts with new
ones.
The following operations are to be made once the machine is repaired:
❑
make sure that all elements are installed properly,
❑
install the dismounted guards,
❑
check whether screws and nuts are tightened,
❑
once all the guards are installed, perform a warm-up start in order to make sure the repaired
machine operates properly.
9.2.
Withdrawal from use
If the machine cannot be repaired anymore, it should be withdrawn from use. For this purpose
oil from intersecting axis gear should be drained and thoroughly clean any excess oil with cleaning
agent. These should be delivered to a proper waste treatment company.
Remaining metal parts should be sold to breaker's yard.
10.
WARRANTY CARD
ROTARY RAKE
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
NOTE:
Warranty card without the required information or with corrected or illegible
information
–
is invalid.
Serial number
Date of manufacture
Manufacturer
Date of purchase
Dealer stamp
Dealer signature
