Operator's manual
Trailed disc mowers
KDC 300 S/W; KDC 340 S/W
KDC 300 ST/WT; KDC 340 ST/WT
- 24 -
Fig. 14. Cutting knife quick replacement
Fig. 15. Disc rotation directions on mower's cutterbar with cutting width of 3.0 m
Fig. 16. Disc rotation directions on mower's cutterbar with cutting width of 3.4 m
NOTE:
Due to various windrow widths in offered mowers (and therefore various
rotation directions of discs), prior to mounting knives check rotation
directions of each disc (Fig. 15, Fig. 16).
NOTE:
Improper mounting of knives will lead the mower to choke. When mounting
pay particular attention to knife rotating freely on the holder's pin.
NOTE:
Due to high rpm of discs, knife holders should be replaced in pairs and of the
same weight – each holder has own weight marked. Otherwise, as a result of
improper balancing, disc vibrations and damages to bearings are likely.
2
1
3
20°
20°
