2
FL-1
Non-Contact Infrared Thermometers
Operating Manual
INTRODUCTION
Thank you for purchase of the IR Thermometer. This is capable of non-contact (infrared) temperature
measurements at the touch of a button. The built-in laser pointer increases target accuracy while the backlight
LCD and handy push-buttons combine for convenient, ergonomic operation.
The Non-contact Infrared Thermometers can be used to measure the temperature of objects’ surface that is
improper to be measured by traditional (contact) thermometer (such as moving object, the surface with
electricity current or the objects which are uneasy to be touched.)
Proper use and care of this meter will provide years of reliable service.
FEATURES:
Rapid detection function
Precise non-contact measurements
Dual laser sighting
Unique flat surface, modern housing design
Automatic Data Hold
°C/°F switch
Emissivity Digitally adjustable from 0.10 to 1.0
MAX temperature displays
Backlight LCD display
Automatic selection range and Display Resolution 0.1ºC(0.1ºF)
Trigger lock
Set high and low alarms
WIDE RANGE APPLICATION:
Food preparation, Safety and Fire inspectors, Plastic molding, Asphalt, Marine and Screen printing, measure ink and Dryer
temperature, HVAC/R, Diesel and Fleet maintenance.
SAFETY
Use extreme caution when the laser beam is turned on.
Do not let the beam enter your eye, another person’s eye or the eye of an animal.
Be careful no to let the beam on a reflective surface strike your eye.
Do not allow the laser light beam impinge on any gas which can explode.
