en
29 / 56
6.2.1
Clean the outlet tap and lubricate with grease
Remove the tap upper part
6. Fully open the outlet tap.
7. Turn back the tap upper part clockwise approx.
15°.
8. Pull the handle to the stop and hold firmly.
9. Pull upwards to remove the tap upper part.
Cleaning and Care
.
Thoroughly clean the outlet tap and upper part
of the tap inside and outside.
.
Thoroughly rinse the parts and surfaces
cleaned with clean mains water and wipe dry.
.
Check the O-rings/seals, replace as neces
sary.
.
Use food quality grease to lightly lubricate the
drain tap for the outlet tap to remain free-mov
ing and leak-tight.
Insert the tap upper part
1. Insert the tap upper part in the tap lower part.
2. Rotate the tap upper part on the handle side in
the area of the guide aperture backwards and
forwards until the tap upper part is engaged
and can no longer be rotated.
3. Pull on the handle while pressing the tap upper
part down.
4. Release the handle and rotate clockwise to the
stop.
5. When the tap upper part is correctly inserted
and closed, the handle must fully engage.
3rd
4th
1st
2nd
15
Guide aperture to
remove the tap upper
part
Handle
Locking and guide
aperture for the use
of the tap upper part
O-rings
Tap upper part
3rd
1st
2nd
