Salutron HardyTest HARTIP 1800, Руководство по эксплуатации

Страница: 22 / 40

20
Figure 6-31 Downward / Upward View
6.8.4. Operation of display view
Press related buttons to enter main menu.
6.8.5. Select Function Setup and press
►
button to enter its sub-menu.
Select Display view, press
►
button to enter it.
Select the display view you wanted and then press
►
button to confirm.
6.8.6. “Hot key” for shifting
In order to change display mode between normal and upright quickly, this tester has a
“hot key”
▲
. At any time of measuring, pressing button
▲
can shift display mode
between normal and upright alternately.
6.8.7. System info
Choose System info from the function menu and press
►
button to enter the system
info window. Machine serial number, battery capacity and storage capacity are showed
on the screen. After viewing them, press
►
button to return to the function menu.
Figure 6-32 System info
6.8.8. User info
Choose User info from the function menu and press
►
button to enter the user info
window. Ref. number, Part and operator information can be displayed on the screen. You
can input these information via PC software. Please refer to 11.3.3 Input user’s
information . After viewing them, press
►
button to return to the function menu.
6.8.9. Calibration
After long time of use, the ball tip on impact body may worn which would lead inaccuracy.
In order to compensate such error, the tester is designed to re-calibrate by user.
Before each calibration, it is recommended to restore the factory default first. (Please
refer to 6.8.11)
Choose Calibration from Function setup menu and press
►
button to enter calibration
setup.