Salus SG888ZB, Системное руководство

Страница: 57 / 76

7 .2
AS20WRF/BRF Thermostat – Installer Parameter Setup
Installers can set up the AS20WRF/BRF parameters using the SALUS Smart Home application if an SG888ZB
Gateway is used and connected to the internet. Alternatively, the parameters can be entered directly on
the AS20WRF/BRF Thermostat. The following procedure illustrates the offline setup. Changes made on the
application or on the thermostat may take a few minutes to go into effect.
1 . To set up installation
parameters on the
AS20WRF/BRF Thermostat,
simultaneously press &
hold the , &
buttons .
2 . Press the up arrow
for menu #49 .
Press confirm
.
3 . SEL –
Press confirm .
4 . US
E
Press confirm .
5 . Use & or confirm key
to change the parameter id (d##) .
Use
& to change
the parameter value .
6 . Pressing confirm advances
to the next function .
7 . Press confirm on function
d19 to return to main screen .
1 2 3 4 5 6 7
PM
Descriptions, default values and value ranges for each thermostat function are listed on the following page.
Section 7
Setting Device Parameters
Before starting set up procedures, press any key to light the display and prepare the Thermostat for input.