Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
6
Run: start to run the SE3001.
Stop: stop the SE3001.
Freq: make a frequency adjustment.
Reference: choose different reference mode.
Blade: choose different blade type.
Spin the knob forward and backward to choose the desired setting. Press the knob to enter the corresponding
submenu of chosen setting.
1.2 Chopping Head
The SE3001 chopping head is made of five parts: a base, a stand, a blade hub, a photoelectric door and a cable
connector as Fig.3. The blade hub is used to fix the blade to the chopping head. The photoelectric door measures
the spin frequency of the blade. The cable connector is a 6P6C double-ended cable connector. The base is designed
for domestic optical platform and can be fixed to 50mm optical platform by M6 screws.
Blade hub
Stand
Cable Connector
Base
Photoelectric door
Fig.3 The SE3001 chopping head
