Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
12
5 Remote Communications
Users can use PC to control SE3001 by commands through USB port. Detailed steps to run a remote
communication is as below:
5.1 Installing the UART to USB Drivers
1.
Open the disk and the files inside are as below:
Fig.6 CD-ROM files
2. Install UART to USB driver.
(a) Open “Uart driver” file as below:
Fig.7 “Uart driver” folder
(b) Double click “FT232_drive.exe” and then you will see the Fig.8 which means the driver is installing.
Fig.8 USB driver installing interface
