Saluki S5800E Series, Руководство пользователя

Страница: 20 / 173

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
20
☆
Red: Battery is 0% to 10% charged;
☆
Bolt and Scroll Bar: Battery is being charged.
☆ ：
No battery and only use adapter.
When either the AC-DC Adapter or the 12 VDC adapter is connected, the battery automatically receives a charge,
and the battery symbol with the lightning bolt is displayed.
CAUTION:
Use only use batteries, adapters, and chargers provided with this instrument.
2.2.4 Data entry
1
．
Parameter setting
You can set parameters with the numeric keys, the arrow keys and the rotary knob. It is simple to change the
parameters quickly with the arrow keys.You can change the parameter continuously with the rotary knob.
2
．
Edit in position displayed
On a measurement display, many parameters are listed in place. You can move the highlight cursor at the place
where a parameter shows, and press the Enter key to begin setting. The numeric keys, arrow keys and the rotary
knob can be used to set the parameter. Press Enter to exit.
3
．
Submenu entry
When pressing the corresponding submenu key, parameter shows on the upper left corner of the display. You can
set the parameter using the numeric keys, arrow keys or the rotary knob, and press Enter to exit the editor.
4
．
Text entry
When saving a Measurement, a Setup or a BMP file, you have to enter the characters and numbers to name it. You
edit the name with the numeric keys. You can switch between capital letter and small letter by pressing the
“
.
”
key.
For example, inputting “1aB” you will do:
1) Press once “1abc”,will entry the number “1”;
2) Press twice “1abc”,will entry the number “a”;
3) Press”.”once, and then press twice “1abc”,will entry the number “B”;
2.3 Mode Selector Menu
Press the MODE key to enter the measurement mode selection menu (Fig.2.4). You can select the desired
measurement mode, or enter the next level menu.