Tel: 886.909 602 109 Email: [email protected]
115
Section 3 Description of Interference Analyzer Menu
1 Frequency menu
·
[Center frequency]:
Press [Frequency]→[Center Freq], and set it with number
keys on the front panel. Select [GHz], [MHz], [kHz] or [Hz] in the frequency unit
menu or set the center frequency with the [↑] or [↓] key or knob.
· [Special note]: When the [↑] or [↓] key or knob is applied, the frequency
step should be the same as the set value of [Step Freq]. You can set the
step frequency with the number keys or [↑] or [↓] key or knob after
changing [CF Step Auto Man] into [CF Step Auto Man].
· [Span]:
Press →[Span] to activate the span menu. Set the span with the
number keys, and select the frequency unit, or set the span with the [↑] or [↓] key
or knob. Refer to [Span] menu description for details.
· [Special note]: When the span is changed with the [↑] or [↓] key or knob,
the step should be 1-2-5 (the RSSI mode must be set under zero span).
· [Starting frequency]:
Press [Frequency]→[Start Freq], and set it with number
keys on the front panel. Select the frequency unit, or set the value with the [↑] or
[↓] key or knob.
· [Stop frequency]:
Press [Frequency]→[Stop Freq], and set it with number keys
on the front panel. Select the frequency unit, or set the value with the [↑] or [↓]
key or knob.
· [Signal standard]:
Press [Frequency]→[Signal Std] and select the signal
standard with the [↑] or [↓] key or knob, recall the signal standard by [Done] or
[OK] in the dialog box. Refer to the dialog box for details.
· [Special note]: When the signal standard is applied, the center frequency
and span will be set as those defined in the signal standard.
· [Channel No.]:
Press [frequency]→[Channel], and the channel setting dialog
box will pop up. Set the channel with the number keys or [↑] or [↓] key or knob.
· [Special note]: The channel should be set based on the applied signal
standard; otherwise, the prompt that setting is not allowed will pop up.
Содержание S3302SB
Страница 1: ...S3302 Series Handheld Spectrum Analyzer User Manual Saluki Technology Inc...
Страница 136: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 136 Fig 7 1 FM Demodulation Analysis Results...
Страница 138: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 138 Fig 7 3 AM FM PM Analyzer Menu continued...
Страница 189: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 189 Fig 11 3 Schematic diagram of map location...
