Saluki S3101 Series, Руководство пользователя

Страница: 14 / 76

14
Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
: Used to start up or shut down the instrument.
【
Preset
】
: Used to reset and restore the system to default initial state.
3.1.2.
Function Key Area
Figure 3-3 Schematic Diagram of Function Key Area
 【
Freq/Dist
】
: Used to set the measurement parameters, including frequency parameter, signal standard, distance parameter and
speed factor.
 【
Sweep/Setup
】
: Used to set the measurement parameters, including trigger mode, sweep mode, sweep time, sweep points and
intermediate frequency band width.
 【
Trace
】
: Used to realize the comparison between reference trace and current data, including the digital operation of difference
value division; or store the current data as a reference trace. Reference trace can also load the saved traces by
【
Save/Recall
】
.

【
Ampt
】
: Used to set the display range of Y-axis.
 【
Marker
】
: Used to set the marker functions, including marker ON/OFF, marker mode, peak search and marker dragging mode.

【
Cal
】
: Used to realize the calibration functions, including calibration method, calibration status ON/OFF and selection of
calibration kit model.

【
Save/Recall
】
: Used to realize the file operations, including save and load measurement status and measurement trace, screen
capture, storage position and file copy.

【
Limit
】
: Used to realize limit test functions, including limit test ON/OFF, alarm ON/OFF as well as the compilation, saving and
loading of limit traces.

【
Run/Hold
】
: Used to switch the results between continuous sweep and holding current sweep of the Analyzer.

【
Meas
】
: used to set the measurement mode and single-dual window switch
 【
System/Local
】
: When in local operating mode, it is used for the settings of system mode, such as the switch of modes between
antenna test and power test, setting of system date, time, power save mode, and view of product serial number and internal
program version number of the Analyzer; when in remote control mode, it is used to return the Analyzer to local function.
3.1.3.
Numeric (Character) Key Area
The numeric keys can be used to enter an exact value or to quickly switch from one value to another value, for changing the
measurement setup of the Analyzer. The keys can also be used to enter characters, mainly to save the instrument settings or input of file
names of measurement traces.