11
Tel: 886.909 602 109 Email: [email protected]
2.
Safety Instructions
Please read safety instruction carefully and Strictly follow!
We will spare no efforts to ensure that production process comply with latest safety standards so as to safeguard the safety of our users.
The design and tests of our products and accessory equipment comply with relevant safety standards. We have established quality
assurance system so that we can better supervise product quality and ensure that all products accord with standards in the system. To
maintain the sound state of equipment and ensure safe operation, please comply with the following instruction. Contact us if you have
any questions.
It is also your responsibility to use this product in correct manner. Suitable for industrial, laboratory and field uses, this equipment,
however, must be used in correct manner so as to prevent personal injuries and property damages. For problems caused by misuses,
liabilities rest on users. By proper use, it means that users should use this product according to prescriptions in the product document
and in the required conditions. As sufficient expertise is required, only professional technicians and people that have been strictly trained
and have mastered necessary skills are qualified to use this product. Please keep safety manual and product document in a proper
manner, and deliver them to the end user. To forestall personal injuries and property loss, please abide by these safety instructions.
Prior to using this product, please read carefully and comply with these instructions accordingly.
2.1.
Device safety
a) Use designated packing container in shipping and avoid falling or violent collisions in moving, which may cause damages to the
device.
b) Use AC-DC adapter shipped with the device to supply power to the product. Using other power adapters may case damages to
internal hardware.
c) Use 220V three-wire regulated voltage AC power supply to prevent high-power spike pulse interference from damaging internal
hardware.
d) Ensure that power supply is well connected to the ground to prevent damages to the device caused by poor connection or false
connection.
e) Take such anti-static measures as wearing anti-static wrist strap when operating this device so as to prevent static from damaging
the device.
f)
Injection of DC signal into input end is prohibited. Signal power needs to be lower than 0.5W. If not, damage to the device may
occur.
g) If device uses external or internal batteries, replace these batteries with the same or equivalent type of batteries. When using other
types of batteries, blast may occur.
h) Both insertions of objects into the gap of the device housing and dumping of liquids over device housing or into device are
prohibited, which may cause short circuit, electric shock, fire or personal injuries.
i)
Notches or gaps in the device, designed to help internal ventilation and whereby prevent overheat, must not be covered.
The
device must not be put on couch, wrapped with carpet, or placed in airtight housing unless ventilation is good
j)
This device must not be placed on radiator, dish heater and other heating devices. Ambient temperature must not surpass the
maximal temperature prescribed in this manual
k) Attention: Once this device is on fire, it may release toxic gases or liquids.
