3
15. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or
electric burner or in a heated oven.
16. Do not use the appliance on a gas or electric cooking top or over or near an open
flame.
17. Use of an extension cord with this appliance is not recommended. However, if it is
necessary to use an extension lead, ensure that the lead is suited to the power
consumption of the appliance to avoid overheating of the extension cord, appliance
or plug point. Do not place the extension cord in a position where it can be pulled on
by children or animals or tripped over.
18. This appliance is not suitable for outdoor use. Do not use this appliance for anything
other than its intended use.
19. DO NOT carry the appliance by the power cord.
20. Do not leave this appliance unattended during use. Always unplug the unit when not
in use or before cleaning.
21. Always operate the appliance on a smooth, even, stable surface. Do not place the
unit on a hot surface.
22.
Ensure that the switch is in the “Off” position after each use.
23. The manufacturer does not accept responsibility for any damage or injury caused by
improper or incorrect use, or for repairs carried out by unauthorised personnel.
24. In case of technical problems, switch off the machine and do not attempt to repair it
yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentioned pre-cautions and instructions, could affect the safe
operation of this machine.
OPERATING YOUR HAIRDRYER
GENERAL
Wash and condition your hair as desired, then ‘rough-dry’ your hair. Add mousse or light
setting agents evenly through the hair for hair protection and a long lasting style. If
desired attach the concentrator nozzle. Start styling your hair at the back and work
forwards. After using the attachment allow it to cool first before removing it from the
hairdryer.
SPEED & HEAT SWITCHES
Ensure the control setting is in the “0” position when the hairdryer is plugged into the
mains. Select the required speed and heat setting by sliding the switches into the
desired heat and speed setting desired for styling the hair.
