GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug.
(2 blades and 1 pin) If the plug does not fit fully into the electrical outlet
contact a qualified electrician. Do not modify the plug in any way or
use an adaptor.
DESCRIPTION OF PARTS
1. Top Heating Elements
2. Bottom Heating Elements
3. Temperature Control
4. Timer
5. Indicator Light
6. Wire Rack
7. Wire Rack Hook
8. Crumb Tray
9. Rack Handle
BEFORE FIRST USE
1. Remove all accessories and shipping materials packed inside the Oven.
2. Wash the Wire Rack and Crumb Tray in warm soapy water. Wipe the
inside of the Oven with a damp cloth or sponge. Blot dry with paper
towels to be sure the unit is dry before using.
3. Place the Oven on a flat counter or other stable surface, close to a
120 volt wall outlet. DO NOT OPERATE ON THE SAME CIRCUIT WITH
ANOTHER APPLIANCE.
4. Position the Oven so that it is at least 2 inches (5 cm) from any surrounding
object. Ensure that nothing has been placed on top of the Oven.
5. The Crumb Tray must be installed before using. Close the Glass Door and
slide the Crumb Tray into the slot under the oven cavity.
6. For the first time only, turn the Temperature Control Dial to 400°F (200°C)
and the Timer dial to 15 minutes. This will burn off any manufacturing oils
still on the Oven. NOTE: The Oven may smoke during this process. This is
normal for a new Oven and will not last more than 10 – 15 minutes.
3
1
2
4
3
5
6
7
8
9
Booklet PO-1009 v4.indd 11
26/07/05 15:51:27
