OWNER’S MANUAL V. 032021 ENGLISH
PT-1735 ELLIPTICAL
This manual can be downloaded on
www.salter.es
NOTE: Body Types: There are 5 body types divided according to the FAT% calculated.
BMR: Basal Metabolism Ratio.
BMI: Body Mass Index.
Press START/STOP KEY to return the main Display.
•
TARGET HEART RATE Program (P9)
Select "
TARGET H.R.
" using UP OR DOWN KEY then press ENTER KEY. "Time" will flash so value
can be adjusted using UP OR DOWN KEY. Press ENTER KEY to save value & move to next
parameter to be adjusted.
Continue through all desired parameters, pressing START/STOP to start workout.
Note: If Pulse is above or below (±5) the set TARGET H.R., computer will adjust the resistance
load automatically. It will check every 20 seconds approx. Note: Each resistance load represents
2 level of loading).
Note: When one of workout parameters counts down to be zero, it will have bi sounds and stop
the workout automatically. Press START/STOP to continue the workout to reach unfinished
workout parameters.
•
HEART RATE CONTROL Program (P10-P12)
There are 3 selection for target pulse:
P10-60% TARGET H.R.= 60% of (220-AGE)
P11-75% TARGET H.R.= 75% of (220-AGE)
P12-85% TARGET H.R.= 85% of (220-AGE)
Select "
One of Heart Rate Control Program
" using UP OR DOWN KEY; then press ENTER KEY.
"Time" will flash so value can be adjusted using UP OR DOWN KEY. Press ENTER KEY to save value
& move to next parameter to be adjusted.
Continue through all desired parameters.
Press START/STOP to start workout.
Note: If Pulse is above or below (±5) the set TARGET H.R., computer will adjust the resistance
load automatically. It will check every 20 seconds approx. (Note: each resistance load represents
2 level of loading).
Note: When one of workout parameters counts down to be zero, it will have bi sounds and stop
the workout automatically. Press START/STOP KEY to continue the workout to reach unfinished
workout parameters.
•
User Program (P13)
User program allows user to set its own program that can be used immediately.
Select “USER” by pressing UP OR DOWN KEY; then press ENTER KEY. "Time" will flash so value can
be adjusted using UP OR DOWN KEY. Press ENTER KEY to save value & move to next parameter to
be adjusted.
Continue through all desired parameters.
After finished set up desired parameters, the level 1 will flash; use UP OR DOWN KEY to adjust
the resistance level for each individual segment. Then press ENTER until finished. (There are
totally 10 times). Press START/STOP to start workout.
Note: When one of workout parameters counts down to be zero, it will have bi sounds and stop
the workout automatically. Press START/STOP KEY to continue the workout to reach unfinished
workout parameters.