OWNER’S MANUAL V. 032021 ENGLISH
PT-1735 ELLIPTICAL
This manual can be downloaded on
www.salter.es
5. USE INTRUCTIONS
KEY FUNCTIONS
START/STOP:
1.Start and Pauses workouts.
2.Start body fat measurement and quit the body fat program.
3.Operates only when in stop mode. Holding key 3 seconds will reset all function value to be zero.
DOWN:
Decrease value of selected workout parameter: TIME, DISTANCE, etc. During the
workout, it will decrease the resistance load.
UP:
Increases value of selected workout parameter. During the workout, it will increase the
resistance load.
ENTER:
To input desired value or work out mode.
TEST (RECOVERY):
Press to enter into Recovery function. When you have finished your workout,
press RECOVERY. For RECOVERY to function correctly, it needs your Heart Rate input. Place both
hand on the pulse sensors. TIME will count - from 1 minute and then your fitness level from F1 to
F6 will be displayed.
Condition
Score
Heart Rate
Excellent
F1
Above 50
Good
F2
40 ~ 49
Average
F3
30 ~ 39
Fair
F4
20 ~ 29
Poor
F5
10 ~ 19
Very Poor
F6
Under 10
MODE:
Press to switch display form RPM to SPEED, ODO to DIST, WATT to Calories during
workout.
WORKOUT SELECTION
After power-up, use UP/ DOWN keys to select your desired program. Then press ENTER to enter
to the desired mode.
SETTING WORKOUT PARAMETERS
After selecting your desired program, you may pre-set several workout parameters for desired
results.
WORKOUT PARAMETERS
TIME/DISTANCE/CALORIES/AGE
Note:
Some parameters are not adjustable in certain programs.
Once a program has been selected, pressing ENTER, will make "Time" parameter flash. Using UP
OR DOWN KEY you may select desired time value. Press ENTER KEY to input value.
Flashing prompt will move to the next parameter. Continue using UP OR DOWN KEY.
Press START/STOP to start workout.