Salora ELITE 2, Инструкция по эксплуатации

Страница: 18 / 61

17
ALARM FUNCTION
The device has an alarm function which can be set to wake you to buzzer, radio, CD or SD card input
source. The alarm duration is 90 minutes.
Setting the alarm time
1. With the device switched off, press and hold the
Alarm button
until the hour digits flash on the
display.
2. Press the
Rewind
or
Forward button
to set the hour, and then press the
Alarm button
to confirm.
–Display: the minute digits flashes.
3. Press the
Rewind
or
Forward button
to set the minute, and press the
Alarm button
to confirm.
–Display: the alarm source flashes.
4. Press the
Rewind
or
Forward button
to set the alarm source between “CD”, “SD CARD”, “USB”,
“TUNER” and “BUZZER”.
5. If you select “CD”, “SD CARD”, “USB” or “TUNER”, the symbol “ ” flashes on the display, press
the Alarm button to confirm.
If you select “BUZZER”, the symbol “ ” flashes, press the
Alarm button
to confirm.
6. Set the alarm volume by using the Volume button .
7. Press the
Alarm button
to confirm and finish the setting.
–Display: the current time and the symbol “ ” or “ ” lights on.
Notes:
If no button is pressed for more than 5 seconds during the setting, the device will quit the process auto-
matically, and you have to start again.
If you select “CD”, “SD CARD” or “USB” as the alarm source, make sure that a CD, SD card or USB
device has been inserted. Otherwise there will be no alarm signal.
Viewing the alarm time
1. In standby mode, repeatedly press the
Alarm button
to cycle through the alarm settings.
You may change the settings according to the procedures of “ Setting the alarm time ”.
Interrupting the alarm
1. During the alarm is sounding, press the Snooze button .
–The alarm signal stops.
–The alarm goes off again at 5-minute intervals (overall alarm duration is 90 minutes).
Cancelling the alarm for the day
1. Press the On/Off button when the alarm is sounding.
–The alarm remains activated for the next day.
Switching off the alarm for the weekend
You can switch off the alarm function over the weekend while the alarm setting is saved.
1. Switch off the alarm function with
WEC button on the remote control.
2. Press the WEC button again to reactivate the alarm function for weekend.
elite2_ib.indd 18 1/3/2011 17:48:06