Salicru CV10-002-S2, Руководство пользователя

Страница: 36 / 104

36 - 104 Function Parameters
Function
code
Name Detailed instruction of parameters
Default
value
Modify
selection 5 : Reverse rotation jogging
6 : Coast to stop
7 : Fault reset
8 : Operation pause
9 : External fault input
10 : Increasing frequency setting (UP)
11 : Decreasing frequency setting (DOWN)
12 : Cancel the frequency change setting
13 : Shift between A setting and B setting
14 : Shift between combination setting and A setting
15 : Shift between combination setting and B setting
16 : Multi-step speed terminal 1
17 : Multi-step speed terminal 2
18 : Multi-step speed terminal 3
19 : Multi- step speed terminal 4
20 : Multi- step speed pause
21 : ACC/DEC time option 1
25 : PID control pause
26 : Traverse Pause (stop at the current frequency)
27 : Traverse reset (return to the center frequency)
28 : Counter reset
30 : ACC/DEC prohibition
31 : Counter trigger
33 : Cancel the frequency change setting temporarily
34 : DC brake
36 : Shift the command to the keypad
37 : Shift the command to the terminals
38 : Shift the command to the communication
39
~
63 : Reserved
P05.03
S3 terminal
function
selection
7
◎
P05.04
S4 terminal
function
selection
0
◎
P05.05
S5 terminal
function
selection
0 ◎
P05.10
Polarity
selection of the
input terminals
The function code is used to set the polarity of the input terminals.
Set the bit to
0 , the input terminal is anode .
Set the bit to 1 , the input terminal is cathode .
BIT0 BIT1 BIT2 BIT3 BIT4
S1 S2 S3 S4 S5
The setting range:0x000~0x1F
0x000 ○