Salda RIS 1000 PE 3.0 страница 11 Скачать руководство пользователя

Страница: 11 / 32

EN |

RIS PE 3.0 v2020.1

5.8. START-UP RECOMMENDATIONS

5.8.1. SYSTEM PROTECTION

The control automatics of the unit have integrated protection against a short circuit of those assemblies. The controllers have the following pro-

tectors:

MCB

F1, F2 - 1A(5x20) MCB protection;

To ensure safe maintenance of the unit, it is necessary to turn off main switch and/or external protection device.

5.8.2. PRE-STARTUP RECOMENDATIONS OF THE UNIT (IN THE PRESENCE OF THE ENDUSER)

Prior to start-up the system must be thoroughly cleaned. Check whether:

• operation systems and unit elements as well as automation and automation devices were not damaged during installation,

•

all electrical devices are connected to power supply and fit for service,

• all necessary automation elements are installed and connected to power supply and MCB, EX1, EX2 terminal blocks,

• cable connection to MCB, EX1, EX2 terminal blocks comply with the existing power connection diagrams,

• all electrical equipment protection elements are properly connected (if they are additionally used),

• cables and wires correspond to all applicable safety and functional requirements, diameters, etc.,

• earthing and protection systems are properly installed,

• condition of all seals and sealing surfaces is correct.

Содержание RIS 1000 PE 3.0

































Результаты поиска

Содержание RIS 1000 PE 3.0

Отзывы:

Похожие инструкции для RIS 1000 PE 3.0

Бренды по названию

Популярные бренды

Salda RIS 1000 PE 3.0, Монтаж и инструкция по установке

Результаты поиска

Содержание RIS 1000 PE 3.0

Отзывы:

Похожие инструкции для RIS 1000 PE 3.0

Бренды по названию

Популярные бренды