*All drawings shown are for illustration purpose only, actual product may vary due to product enhancement.
Model NO.
Standby Power
Mounting height
Cut-out (Recessed mount)
Warm-up Time
Hold-Time
Brightness Threshold
Ta
IP
Storage Humidity
Operation Humidity
Detection Angle
Detection Range
Detectable Movement
Speed
SMS861CD/BTAM
220-240V~ 50Hz
<1W
2.2-4m
72mm
30 seconds
10 seconds to 30 minutes
<10 - 2000lux
IP20
-10
℃
- 40
℃
10%-85% RH, NC
10%-85% RH, NC
360deg
Max. 8m @24
℃
Load Rating
Input
Incandescent Max. 800W
LED Max. 400VA
Fan Motor Max. 100VA
0.6-1.5m/s
M
**The sensor Fresnel lens is specially designed to give optimum performance. Do not apply any pressure on it, as this may damage the lens, and
adversely affect the performance of the sensor.
Tip-Walking Direction Matters
The sensor is more sensitive to movement
across the sensing pattern, and less sensitive
to movement directly toward to sensor.
Please plan the mounting location wisely!
Surface-mount setup
(default in the package)
Surface
mounting box
Spring clips
Recessed-mount setup
Front cover
Fresnel lens**
SAL products are designed in accordance with all mandatory International and Australian Standards, which require installation in accordance with
AS/NZS3000 by a qualified installer and regular cleaning and maintenance of the equipment. Products are sold in accordance with the following
instructions and SAL standard terms and conditions of sale, available via www.sal.net.au.
Due to continued product and information updates, product data sourced from sal.net.au shall not form part of any contract and or technical performance
guarantee unless expressly confirmed in writing by SAL at the time of order.The product wireframe drawings in this document are intended for illustration purposes
only and may differ from the final physical product. The installation instruction is subject to change without prior notice.
MASTER
1. Foreword
IMPORTANT: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY PLEASE READ THESE GUIDE AND WARRANTY INSTRUCTIONS BEFORE INSTALLING THE PRODUCT.
2. Product Introduction
PIXIE Smart Passive Infrared Motion (PIR) sensor Indoor Ceiling Mount is the new
member of the continuously evolving PIXIE smart home system.
As a PIR sensor, this product detects moving infrared sources (typically a person)
that are within the detection area, and in response to that movement activates
an electrical load, typically turning on a light, achieving security and energy
management benefits in a wide range of domestic and commercial
applications.
As a smart sensor, capabilities including switching the working mode among
motion sensor mode, override-on mode and override-off mode is as simple as a
tap on the phone, or a push on a button; or even automated as part of a
schedule.
2.1 Product Features
• Two mounting methods: recessed-mount and surface-mount
• Surface-mount setup and Recessed-mount setup included in box
• 3-wire sensor, no minimum load requirement
• Change working modes to suit different application scenario smartly
• Parameter adjustment can be done in the PIXIE App and on the physical dial.
4. Installation and Wiring
4.1 Select a proper location
• The recommended mounting height to achieve the optimal detection range is 2.4 meters.
• Avoid objects that may be impacted by breeze and wind, typically but not limited to curtains, tall plants etc. in the sensor’s detection range.
• Avoid aiming the sensor toward objects high reflective surfaces like mirrors, monitors etc.
• Do not mount the sensor close to objects which can create rapid temperature changes, e.g. air conditioning vents, heaters, lights etc.
• Avoid mounting the sensor where condensation may form on the Fresnel lens
• Do not mount the sensor on any surfaces/objects that is subject to movement due to wind, vibration or other causes
2.2 The package includes
• Smart PIR Sensor Indoor Ceiling Mount x 1
• Accessory pack (screws, expansion bolts, caps) * 1
• Surface Mount Kit * 1
• Flush Mount Spring Clip Kit * 1
• Quick Start Guide *1
2.3 Product illustration*
3. Specifications
DIY
SAL products are designed in accordance with all mandatory International
ord
: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY PLEASE READ THESE
SMS861CD/BTAM
PIXIE Smart PIR Sensor
Indoor Ceiling Mount
Quick Start Guide
Version
Date
18/05/2023
1.1
STALLING THE
AND WARRANT
