OPERATING INSTRUCTIONS
Please Note: When the device is turned on, it will take a 1 minute to
start heating & reach max power.
Your heater should not be used in areas where surface water can rise
above the level of the base as electronic parts are above this point.
1. Assemble the device as described.
2. If outdoors - Plug it into a waterproof outlet. If indoors plug into a
standard UK socket outlet
3. Only switch the unit on when the appliance is on a flat and stable
surface.
4. Power on: - take out all the power cord from back cover of body and
connect power to the power socket. The power indicator light will
then light up. See figure 3 & 4.
Control panel function
：
Other operations
:
Operation instruction
1.
Remote control
2 x CR2025 batteries
are included
1. Same as control panel.
2. Control range:
≤
4M.
3. The remote control is magnetic and will
stick to most metallic objects to prevent you
losing it.
2.
Shutdown appliance
Press “off” button and unplug.
3.
Moving and storing your
Patio Heater
Tilt the body backwards 30~40
0
before
moving See figure 6.
4.
Protecting your Patio
Heater
Use the weatherproof cover to protect the
appliance when not in use and for long
term winter storage.
Function
button
No. of
Times
Button
Pressed
Result Light
Indicator
1
2700W
Middle orange
indicator light
2
1350W
Left indicator light
3
1350W
Right indicator
light
On/power
4
2700W
（
repeat
）
Middle orange
indicator light
1
The body sensor will operate
and the appliance will turn off
if nobody is present for 4-5
minutes. It should restart if
you walk in front of it again. If
not use remote or control
panel.
Green indicator
light
Economy
& safety
sensor
2
Cancel Indicator
off
1
Illuminate
（
figure5
）
The low energy
top lamp will light
2
Cancel Light
off
Light Head can
be tilted in 4
positions as
shown in figure 5
