M2 Series Micro-inverter
19
20
Table 4.1
Installation parts
A
C
B
D
E
F
G
I
Multi-machine system
Single-machine system
Grid
Figure 4.1
Connection diagram
4.3 AC Side Cable Connection
Step1: Take out the AC connector from the package.
Figure 4.2
Connector wiring
(1) If the micro-inverter is connected to 120/240V split-phase power grid, connect two live lines to port L and
port N.
Figure 4.3
Split-phase power grid
(2) If the micro-inverter is connected to 230/400V three-phase WYE power grid, connect the live line to port
L and connect the neutral line to port N, as the connection of single-phase power grid.
Figure 4.4
Three-phase WYE power grid
No. Part Name
A
AC trunk cable
B
AC trunk connector unlock tool
C
AC trunk end cap
D
M8*25 bolts (optional)
No. Part Name
E
Mounting bracket (optional)
F
AC trunk port cap
G
AC trunk port disconnect tool
I
DC extension cable (optional)
Wire
Color
L
Red
N
Black
PE
Green
