PFD2/PFS2 – OPERATING INSTRUCTIONS
INDEX
DATE
N°
03
26/06/01
DC02020US
8/11
VI.3.3 – Replacing the central shaft and composite rings
Follow the same steps described in V1.3.2 until 8) then:
9) Remove the central shaft (P/N 2761),
10) Remove the plastic caps (P/N 1028),
11) Remove the 4 C-PEEK plate screws (P/N 2729),
12) Remove the 4 composite rings (P/N 7135F) from plates (P/N 2741 and 2746),
13) Clean the plates and the core (P/N 2740) by removing the dust from previous wear by O.rings,
14) Insert 4 new composite rings with tools from our tool kit (P/N KPFD2) as follows:
•
Each of the 4 shaft rings (P/N 7135F) is composed of two parts: one O.ring and one sleeve
(Figure 1):
Figure 1
7135F
Sleeve
O.ring
Inner side
Outer side
