PFD2/PFS2 – OPERATING INSTRUCTIONS
INDEX
DATE
N°
03
26/06/01
DC02020US
10/11
•
While holding the O.ring positioning tool (P/N 1641) against the plate, place the sleeve insertion
tool (P/N 2680) into the other side and use the push-button to release the sleeve free on the
O.ring (Figures 5 & 6):
•
Use the pick (P/N 1643) to correctly position the sleeve in its groove. Be careful not to damage
the sleeve (Figure 7):
•
Repeat this operation for the 4 sets of rings.
15) Fit the plates and the body rings (P/N 2742) on the core (tighten moderately the screws
P/N 2729), insert first the O.ring (P/N 1720) under the screw head,
16) Fit new plastic caps (P/N 1028) so that tightness between the core and the plates is ensured,
17)
Important
: lightly wipe the central shaft and shaft composite rings with
PTFE grease
before re-
assembly. Then insert the central shaft without turning it when threaded part reaches the O.rings,
18) To re-assemble follow the above instructions but in reverse order.
Figure 7
1643
Figure 5
Figure 6
Inner side
Push
Outer side
1641
