SAINT-GOBAIN MDP 50, Руководство по эксплуатации

Страница: 6 / 8

5/7
Any of the above may be detrimental to the normal operation and life expectancy of the pump unit and
may void the warranty.
If the pump is being used with very corrosive chemicals and is left for extended periods not in use, we
recommend that the system be emptied and flushed.
V – Trouble shooting
If the pump stops for any reason, check:
•
The air/nitrogen supply,
•
That all valves in the chemical line are open,
•
That all inlet and outlet regulators are open,
•
That connections and tubes between pump and control unit are in good condition.
•
You are following your local Health and Safety Regulations with regard to the particular
chemical.
The above is based on SGPPL experience.
SGPPL cannot be held responsible for premature failures if the pump is misused or
damaged due to an incorrect application.
VI – Warranty
SGPPL pumps and accessories are warranted for all parts and labour against faulty workmanship
(return to factory) for one year from delivery date .
SGPPL is not responsible for damage to its products through improper installation, maintenance, use
or attempts to operate them beyond their mechanical capability, intentionally or otherwise, or for
unauthorized repair.
SGPPL shall not be liable for any indirect, special, incidental or consequential damages resulting from
the use, failure or malfunction of any product.
Safety hints
 Installation, operation, and maintenance by qualified staff only.
 Before start-up respectively after the first hours of operation, the nuts must be checked for tightness;
if necessary they have to be tightened. This may also be necessary after longer periods of stoppage,
with large variations of temperature, transport as well as disassembly of the pump.
 Before start-up of the pump, operators should become acquainted with the Troubleshooting section
of this manual.
Problems which cannot be solved or with an unknown reason should be passed on to the
manufacturer.
 the liquid conveyed might escape from the leak detection port in the event of a diaphragm rupture.
® Flaregrip II Saint-Gobain Performance Plastics registered trademark