6105
6105
6105
6105 Belt
Belt
Belt
Belt Feeder
Feeder
Feeder
Feeder integrator
integrator
integrator
integrator
---
---
---
--- User
User
User
User’’’’s
s
s
s Guide
Guide
Guide
Guide ---
---
---
---
4
1.3
Features
Features
Features
Features
Saimo 6105 integrator is specially designed for belt scales, meeting all measuring and control
requirements on typical applications.
The software has been solidified into the memory chip. Each preprogrammed function can be activated
automatically by operating from the keypad or installing the optional expansion board.
Saimo 6105 integrator has a powerful and user friendly operating interface, easy for function selection,
data setup, operation and maintenance.
The following functions have been completed into Saimo 6105 integrator.
·
Measuring
·
Monitoring
·
Printing
·
Communication
Figure 1-3
Front Panel
1.3.1
1.3.1
1.3.1
1.3.1
Measuring
Measuring
Measuring
Measuring Function
Function
Function
Function
1.
Instantaneous Flowrate Calculation
The signal delivered by the load cell(s), which represents the weight per unit length of the belt(kg/m), is
multiplied by the signal delivered by the speed sensor which represents the belt speed (m/s). The result
of this operation is the instantaneous flowrate (kg/m x m/s=kg/s) which is then multiplied by suitable
constant to obtain the value in the required engineering units (kg/h or ton/h, etc.). An adjustable
damping filter is provided separately for displayed rate and current outputs.
2.
Flow Totalization
The total is accumulated by multiplying mass per unit length by incremental length and totalizing the
result in engineering units.
3.
Zero and Span Automatic Calibration
Zero and span calibrations are based on belt length defined by a number of belt revolutions.
