Scan to watch a video
on how to install the
pulley and belt�
B
C
1
3
2
4
A
D
WARNING: This product can expose you to chemicals including Nickel (Metallic), which is known to the State of California
to cause cancer� For more information go to www�P65Warnings�ca�gov�
WARNING: CHOKING HAZARD: Small parts� Not for children under 3 years� CONTAINS FUNCTIONAL SHARP POINT� Adult
supervision recommended�
Ultrafeed Machine Damage Prevention
To prevent damage and keep your machine running smoothly,
please observe the following when sewing:
• Lower the presser foot before sewing (
A
)�
• Always rotate the balance wheel toward you (
B
)�
• Trap your threads when beginning to sew to avoid a rat’s nest of tangled thread (
C
)�
• Take-up arm (
D
) should reach its uppermost position and then start to descend before lifting the foot to remove application�
• With the machine threaded, don’t operate the machine without fabric under the foot.
WorkerB
®
Motor System Warnings:
• Electrical items exceeding 100 watts should not be used in the control box outlet� Exceeding this limit may blow the
control box fuse�
• Do not plug/unplug the foot control with the control box switched on� This could cause the machine to run
unexpectedly�
• Always use a grounded outlet�
• Don’t use a plug adapter or extension cord without a grounded plug.
• WorkerB Power Pack is designed to work on inverter/generator of 400W or more of the Modified Sine Wave or Square
Wave types� Pure (or Digital Synthesized Wave) Inverters/generators will not work�
• Turn off the motor when servicing, changing needle or
feet, or leaving the machine unattended�
• Do not operate in conditions where you or the machine
are or may become wet�
• Operate the machine on a firm, level surface with
adequate room for safe operation.
• Observe caution when placing your hands, other body
parts or clothing near any moving parts including but
not limited to the walking foot, needle, balance wheel
and belts�
• Do not run the machine without its covers in place�
• Do not stop the movement of the balance wheel with
your hands�
• Always use the proper voltage required for the motor.
• Do not drop the machine�
• Wear protective eyewear when sewing�
• Wear shoes when operating the foot pedal�
• Provide supervision when allowing others to use the
machine, particularly children and those who are
unfamiliar with the machine’s operation.
• Do not use the machine around flammable materials.
• Do not use a plug adapter or extension cord that
bypasses the ground pin�
• When plugging the foot control wiring into the
machine, be cautious to connect the receptacles
correctly to avoid electric shock�
• Always rotate the balance wheel by grabbing the
top of the wheel and rotating toward the front of the
machine�
Ultrafeed Safety
Please observe the following when using your Sailrite
®
sewing machine:
1 |
Sailrite�com
Ultrafeed
®
LSZ Guidebook
| 2
