Configuration with the Service Interface
98-139768-A
Chapter 4: Configuration
4-15
4444
Configuration
4.3.4
Managing Coast Station lists
You can manage the list of coast stations for each frequency and each Navtex area by
editing, adding or deleting coast stations. Adding a coast station is necessary if a new coast
station has been set up. Then you must add the new coast station to the list of existing
coast stations to enable the SAILOR 6390 Navtex Receiver to receive Navtex messages
from the new coast station.
1. Select the frequency and the area from the drop-down box and click
Search
.
The current list of coast stations known to the SAILOR 6390 Navtex Receiver is
displayed.
2. Select the coast station by selecting the respective radio button and click
Edit
.
3. Make the changes and click
Update
to save the changes.
4. Add a coast station by filling in the fields, then click the
Add
. The new coast station will
now be known to the SAILOR 6390 Navtex Receiver.
Figure 4-13: Service Interface: Coast Stations
Note
A reset to factory default settings deletes all changes made to the coast station
list.
Содержание 6390
Страница 8: ...Table of contents viii 98 139768 A ...